Browse：
Add Time：	2016-08-20 16:04:36
Recommendation：

Frequency conversion between cable is mainly used for frequency conversion power and frequency conversion motor,
Connect with cable, as well as the rated voltage of 1 kv and below,
The transmission and distribution lines, transport electricity. Particularly suitable for papermaking,
Metallurgy, metal processing, mining, railway and food processing industries.
Conditions of use
1, rated voltage U0 / U: 0.6/1 kv.
2, cable conductor allows maximum temperature of 90 degrees for a long time, short circuit when the highest temperature of 250 degrees
3, installation environment temperature is not lower than 0 degrees, laying fixed installation when the environment temperature is not lower than - 10 degrees.
4, cable allows the minimum bending radius should not less than 15 D (D - cable diameter, mm)
Product performance
1, the design adopts the meet the requirements of GB/T3956-1997 5 class soft stranded copper conductors.
2, cross-linked polyethylene insulation, good heat resistance weather resistance.
3, low transmission impedance, good electromagnetic compatibility.
4, low capacitance
5, good anti-jamming performance and low radiation.
6, symmetrical three core cable structure design, transmission performance is better than 4 core cable.
Model name

BPGGP

Silicone rubber insulated and sheathed wire braided shielding high-temperature frequency conversion power cable.

BPGGP2

Silicone rubber insulated and sheathed copper tape around the package block high temperature resistant frequency conversion power cable.

BPGGPP2

Silicone rubber insulated and sheathed wire braided copper tape around the package block high temperature resistant frequency conversion power cable.

BPGGP3

Silicone rubber insulated and sheathed aluminum polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPGVFP

Nitrile sheathed wire braided shielding high temperature resistant silicone rubber insulated frequency conversion power cable.

BPGVFP2

Silicone rubber insulation nitrile sheath copper tape around the package block high temperature resistant frequency conversion power cable.

BPGVFPP2

Silicone rubber insulation nitrile sheath copper wire braided copper tape around the package block high temperature resistant frequency conversion power cable.

BPGVFP3

Silicone rubber insulation nitrile sheath aluminum polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPFFP

Fluorine 46 insulated and sheathed wire braided shielding high-temperature frequency conversion power cable.

BPFFP2

Fluorine 46 insulated and sheathed copper tape around the package block high temperature resistant frequency conversion power cable.

BPFFPP2

Fluorine 46 insulated and sheathed wire braided copper tape around the package block high temperature resistant frequency conversion power cable

BPFFP3

46 insulation and sheath of aluminum fluoride polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPVVP

PVC insulated and sheathed wire braided shielding frequency conversion power cable.

BPVVP2

PVC insulated and sheathed copper tape around the package block frequency conversion power cable.

BPVVPP2

PVC insulated and sheathed wire braided copper tape around the package block frequency conversion power cable.

BPVVP3

PVC insulated and sheathed aluminum polyester composite film around the package block frequency conversion power cable.

BPYJVP

Crosslinked polyethylene insulated PVC sheathed wire braided shielding frequency conversion power cable.

BPYJVP2

Cross-linked polyethylene insulated PVC sheathed copper tape around the package block frequency conversion power cable.

BPYJVPP2

Crosslinked polyethylene insulated PVC sheathed wire braided copper tape around the package block frequency conversion power cable.

BPYJVP3

Cross-linked polyethylene insulated PVC sheathed aluminum polyester composite film around the package block frequency conversion power cable.

Four: the basic model and name

BPGGP

Silicone rubber insulated and sheathed wire braided shielding high-temperature frequency conversion power cable.

BPGGP2

Silicone rubber insulated and sheathed copper tape around the package block high temperature resistant frequency conversion power cable.

BPGGPP2

Silicone rubber insulated and sheathed wire braided copper tape around the package block high temperature resistant frequency conversion power cable.

BPGGP3

Silicone rubber insulated and sheathed aluminum polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPGVFP

Nitrile sheathed wire braided shielding high temperature resistant silicone rubber insulated frequency conversion power cable.

BPGVFP2

Silicone rubber insulation nitrile sheath copper tape around the package block high temperature resistant frequency conversion power cable.

BPGVFPP2

Silicone rubber insulation nitrile sheath copper wire braided copper tape around the package block high temperature resistant frequency conversion power cable.

BPGVFP3

Silicone rubber insulation nitrile sheath aluminum polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPFFP

Fluorine 46 insulated and sheathed wire braided shielding high-temperature frequency conversion power cable.

BPFFP2

Fluorine 46 insulated and sheathed copper tape around the package block high temperature resistant frequency conversion power cable.

BPFFPP2

Fluorine 46 insulated and sheathed wire braided copper tape around the package block high temperature resistant frequency conversion power cable

BPFFP3

46 insulation and sheath of aluminum fluoride polyester composite film around the package block high temperature resistant frequency conversion power cable.

BPVVP

PVC insulated and sheathed wire braided shielding frequency conversion power cable.

BPVVP2

PVC insulated and sheathed copper tape around the package block frequency conversion power cable.

BPVVPP2

PVC insulated and sheathed wire braided copper tape around the package block frequency conversion power cable.

BPVVP3

PVC insulated and sheathed aluminum polyester composite film around the package block frequency conversion power cable.

BPYJVP

Crosslinked polyethylene insulated PVC sheathed wire braided shielding frequency conversion power cable.

BPYJVP2

Cross-linked polyethylene insulated PVC sheathed copper tape around the package block frequency conversion power cable.

BPYJVPP2

Crosslinked polyethylene insulated PVC sheathed wire braided copper tape around the package block frequency conversion power cable.

BPYJVP3

Cross-linked polyethylene insulated PVC sheathed aluminum polyester composite film around the package block frequency conversion power cable.